Imagine that your bathtub is in dire necessity of replacement but don’t want to waste your entire weekend doing more of these tedious and boring job? If the answer is in the affirmative then Tub reglazing is just the right option in your case. This may not take you more then 4 to 5 hours and then your bathtub will likely be just like new.

You may be wondering whenever you do the daunting task of reglazing by yourself. The solution is, you probably will if you take care of few things. One thing that you have to remember while reglazing is your own safety. This may prove to be fatal if all thecorrect protective measures are not taken. You need to cover every possible part if your body as the chemicals used in the act is toxic. It is preferable that you try the work in an open area.

Once you are armed for bath tub resurfacing The initial step is always to clean your tub thoroughly You must clean remove the gasket and the caulk when you rinse the tub. You may see a wide range of chemicals in the bath refinishing kit. Of all the chemicals the foremost and the 2nd are for the purpose for cleaning. You will use the first chemical to scrub th face in the tub and with the second solution you can also make the outer lining sore and rough.

You have to then make sure that no oil can there be on any part of thebathtub. If there is oil then this “primer” will not be able to grip properly. Next, you have to use the third solvent to get rid of the sediment if any. Now the surface is ready for the “primer”. Withf paper towels you will need to spread the reducer. You’ll have to then leave the solution within the tub for around thirty minutes. You will need to wash with primer reducerto make sure that the surface is completely dry. You should rinse the tub several times to confirm dryness.

Next, be sure to cover the outer lining area with tub refinishing in areas where it is not applied. These areas need to become cautiously wrapped with paper tape. You should check the seal carefully. You have to apply base coat in the tub after sealing over remianing area. During this period ventilation is very important and use respirators for those who have them at your home. You must go through the manual thoroughly while mixing the primer’s component. You can easily spray t on the tub by using a spraying gun or something similar to that.

You are nearly done with refinishing. Your next job would color your tub. Here you are able to let your imagination run wild and you will also choose prints. However refer to the manual carefully while mixing the painttogether for the topcoat. Apply the topcoat after thirty minutes have passed from your time of applying the primer. You can use a sprat gun to make use of the topcoat. You are completely done now. Wait for at least 72 hours before you step into your all new reglazed bathtub.